mapes, architectural canopies, architectural canopy, hanger rod canopy, hanger rod canopy, aluminum canopy systems, aluminum canopy, metal canopies, Custom Curved


Chicago, IL

Project Number: M-5184

CATEGORY: Custom Arched

Project Details


ARCHITECT: Holabird & Root – Chicago, IL

CANOPY STYLE: Superlumideck

MATERIAL: All extruded aluminum 6063 T-6.

FINISH: Powder coat – sandstone.

DIMENSIONS: Main entrance unit: 6’ 6” proj x 29 ft wide w/ 47 ft radius to top of fascia.

FASCIA: Standard 8 inch tall extruded aluminum “G” style on 4 sides (.125 thick).

DECKING: Mapes standard 2 3⁄4 inch style 6063-t6 extruded aluminum set at right angles to wall (.078 thick).

HANGER RODS: Standard 1 inch diameter powder coated to match canopy finish color.

ESCUTCHEON PLATES: Standard 3 inch diameter x 1⁄4 “ thick powder coated to match canopy finish color.

WALL ATTACHMENT: Upper wall attachment: Steel tab by others attached to interior structural components and projecting out through brick veneer for hanger rod attachment purposes. Lower deck attachment location: though bolted into interior structural construction behind brick veneer. Through bolts and compression tubes provided by Mapes, with lengths as required.

DRAINAGE: Standard Mapes scuppers installed for open discharge from canopy level. Scuppers on this project were field located at back corners to discharge into plant foilage. Can be mounted at front corners as well. (Downspouts also available and would require 2 on arched canopy styles).

FINISHES AVAILABLE: Clear anodized. Bronze or white baked enamel.

Other Projects You Might Like