FASCIA: Standard 8 inch tall extruded aluminum “G” style on 4 sides (.125 thick).
DECKING: Mapes 6 inch flat soffit style; 6063- T6 extruded alum (.078 thick) set at right angles to wall.
HANGER RODS: Standard 1 Inch diameter powder coated to match canopy finish color.
ESCUTCHEON PLATES: Standard 7” x 7” aluminum set in square orientation at wall face.
WALL ATTACHMENT: Upper and lower attachment locations: through bolts into structural wall behind polished marble veneer. Interior wall assembly blocked and braced for canopy attachment. Through bolts / anchor bolts provided by Mapes w/ lengths as required. Compression sleeves provided by Mapes as well.
DRAINAGE: To interior wall drain leader from standard integral rear canopy gutter. Water drains to tight radius elbow below canopy and turns into drain leader from building interior. Interior drain by others.
FINISHES AVAILABLE: Clear anodized. Bronze or white baked enamel.