FASCIA: Optional 10 inch tall fascia “ basic face plate fascia extension ” attached to the face of the standard 8 inch tall extruded aluminum “g” style fascia. The “g” style is supplied on 4 sides(.125 thick).
DECKING: Mapes standard 2 ¾ inch style, 6063-t6 extruded aluminum set at right angles to wall. (.078 thick).
HANGER RODS: Standard 1 inch diameter powder coated to match canopy finish color.
ESCUTCHEON PLATES: Optional 7 x 7 inch square style powder coated to match canopy finish.
WALL ATTACHMENT: Through bolts at upper and lower connections into structural steel behind exterior metal panels. Trough bolts and steel compression tubes provided by Mapes w/ lengths as required.
DRAINAGE: Optional rear downspout field located at back inside corner. (Simple front corner scuppers are standard).
FINISHES AVAILABLE: Clear anodized. White or bronze enamel.